Our petrol cement mixers are high quality, robust and reliable Belle Minimix 150 units, ideal for use on site and in remote outdoor locations away from an electrical power supply. These mixers are industry standard pieces of equipment that allow the operator to mix high volumes of cement and concrete quickly and easily. These concrete mixers feature an extra thick 130 litre drum with efficient and durable mixing paddles. They have a heavy-duty sealed cast gearbox for longer life, and full thermal overload protection. The mixer comes supplied with a tipping stand included as standard, allowing you to operate the mixer at an elevated height, tip the concrete into a wheelbarrow and transport it wherever it is needed on site. With a mix capacity of 90 litres, these petrol mixers provide the fastest, most efficient and most reliable way of mixing cement and concrete for a range of different jobs. You can book a petrol cement mixer hire online or over the phone. Then you can collect from your nearest store at the start of the hire or we can deliver to you.
Stood on a firm, level surface, pour approximately one gallon of water into the concrete mixer. Make sure that you use the correct amount of water for the cement mix, as explained in the instructions. If you add too much water, the cement mix will become too thin and unmanageable. If you do not add enough water, the concrete will become too thick and will not combine thoroughly. Next, pour the cement mix into the drum, plug the mixer in and turn it on. Allow the machine to fully mix the contents and ensure that there is no visible powder left. Leave the cement mixer running for as long as you need it to keep the contents moist and manageable. When ready, turn it off and slowly tilt the drum to pour the fresh cement out. You can use a mixer to produce general purpose concrete, foundation concrete, paving concrete, standard mortar, strong mortar, and more. You can use a stiff brush or a mix of 1" (2½cm) gravel and water to clean the cement mixer out to prevent any residue from hardening inside it.
Please note: This product description and detail is based on the model we have the most stock of. Alternative brands of equivalent specification may be supplied based on location and availability.
| Motor Power: | Honda GX120 |
| Drum Capacity: | 130L |
| Mix Capacity: | 90L |
| Power (hp / Kw): | 4 / 2.9 |
| Drum Speed (rpm): | 10 - 24 |
| Dimensions: Width x Height x Length (mm): | 597 x 890 x 1211 |
| Weight without stand (kg): | 61 |
Reliable cement mixer and came with the stand and full tank of fuel. Delivery was cheap even though I am miles away from the nearest tool hire shop.
Reviewed by Richard
The petrol mixer I hired was very professional and high quality. Very good equipment and the booking service over the phone was very efficient. Good service, I would use Mammoth again.
Reviewed by Eric S
Overall Rating: 5/5
Use suitable engine oil of a 10W/30 grade for filling and topping up the engine.
Ensure that the cement mixer is on a firm, level surface. Use approximately one gallon of water, and pour it into the drum slowly. Ensure that you use the correct amount of water for the cement mix, as outlined in the instructions. Too much water will make the cement mix too thin and unmanageable. Not enough water will make the concrete too thick, and it will not combine thoroughly. Pour the cement mix into the drum. Check that the engine has enough oil in and then power up the mixer. Allow the machine to thoroughly mix the contents and ensure that there is no visible powder left. Leave the cement mixer running for as long as you need it to keep the contents moist and manageable. When the contents are fully mixed, turn the machine off and slowly tilt the drum to pour out the fresh concrete.
Clean your cement mixer using a stiff brush or a mix of 1 inch (2½cm) gravel and clean water. Using plenty of water clears the drum out and prevents any residue from hardening inside it. Do not use any cleaning fluid products, such as paint thinner, lacquer, turpentine, or similar.
General purpose concrete is made up of 1 part cement, 2 parts sand, and 3 parts coarse aggregate. This concrete is suitable for most purposes, but not for foundations or paving. Standard mortar is made up of 1 part cement, 5 parts soft sand, with 1 part lime or plasticiser optional. This mortar is used for sheltered bricklaying, rendering, and more. A range of different concrete and mortar mixes can be created for various applications.
Mammoth Hire has over 400 Click & Collect locations across the UK and delivers tools & equipment to your door. Simply Call 0800 142 2022 or Book Online.
Complete the form for more details and pricing.
Complete the form for more details and pricing.
Complete the form for more details and pricing.
Complete the form for more details and pricing.
From 1st April 2022, our suppliers will only fuel machines with white diesel. This is due to new government guidelines.
If you, as the hirer, refuel any equipment while it is in your possession, it must be with WHITE DIESEL.
YOU MUST NOT USE RED DIESEL IN HIRED MACHINES OR EQUIPMENT.
If you return a machine refuelled with rebated diesel, suppliers will have to remove and dispose of the fuel. They must also flush the tank and supply lines before they can refuel them. The process is chargeable, with no exceptions.
An insurance charge will be calculated at checkout. If you have proof of your own Hired-In Plant Insurance (HIPI) and wish to opt-out of the insurance charge, you can do so by booking via Live Chat.
When an unexpected expense crops up and you need to get hold of different equipment, the costs involved can become a struggle. National Tool Hire don't think that anyone should have to wait when essential work and building improvements are needed, or when there's a passion project that needs indulgence.
To help our customers and make tool hire even easier, we've worked with PayPal to provide a way to spread the cost with PayPal Pay in 3. You can use Pay in 3 for eligible shopping cart amounts between £30.00 to £2,000.00. Terms apply.
The simple and efficient way of managing your tool and plant hire spend with discounted hire rates. No matter what the job, a trade account makes managing your cash flow a whole lot easier.
Ask a question, request a call back or leave feedback.
